Elimination Voltammetry of Miniaturized Mercury Drop Electrodes

Elimination voltammetry with linear scan (EVLS) in connection with renewed mini‐ drop mercury electrodes provides valuable information about the character and kinetics of processes at electrode/electrolyte interfaces. Based on the experiment related to the hydrogen evolution, it is presented that the EVLS is more sensitive than other voltammetric methods. Using miniaturized mercury electrodes, the EVLS is capable of detecting the effect of spherical diffusion associated with both the scan rates and the size of an electrode drop.     

Instant controlled pressure drop extraction of lavandin essential oils: Fundamentals and experimental studies

Détente Instantanée contrôlée (DIC), French for Instant Controlled Pressure Drop, was performed on laboratory apparatus as well as on a pilot plant for proving its feasibility, and identifying the optimized processing conditions and recognizing the energy consumption and the quantity of water used for such an operation. GC–MS and SPME analysis of the extracts and residue material were carried out to assess the extracts and solid residues. The lavandin essential oils obtained by using the new DIC extraction process was studied, modeled and quantitatively and qualitatively compared to the conventional hydrodistillation method. The most important differences between the two essential oils were reflected in the yields, with 4.25 as against 2.3 g EO/100 g of raw matter, and in the extraction time, with 480 s as against some hours for respectively the DIC and the hydrodistillation operations. These differences have been previewed through the fundamental analysis. They can normally explain the great decreasing of energy consumption to be 662 kWh/t of raw material. The amount of water to be added was about 42 kg water/t of raw material.     

Decomposition of Benzene in Air in a Plasma Reactor: Effect of Reactor Type and Operating Conditions

The decomposition of benzene was carried out in two types of plasma reactors packed with BaTiO₃ pellets: one reactor had two stainless steel electrodes (SUS reactor), and the other reactor had a glass layer between two concentric electrodes (GL reactor). The decomposition efficiency and the suppression of formation of N₂O and NO_x were greater in the GL reactor than in the SUS reactor. In contrast, the suppression of O₃ formation and the oxidation to CO_x in the SUS reactor were superior to those in the GL reactor. The effect of wa eform and frequency of applied ac power was in estigated for each reactor.     

Measurement of thermal rise-time of a laser diode based on spectrally resolved waveforms

Thermal resistance and thermal rise-time are two basic parameters that affect most of the performances of a laser diode greatly. By measuring waveforms received after a spectroscope at wavelengths varied step-by-step, the spectrally resolved waveforms can be converted to calculate the thermal rise-time. Basic formulas for the spectrum variation of a laser diode and the measurement set-up by using a Boxcar are described in the paper. As an example, the thermal rise-time of a p-side up packaged short-pulse laser diode was measured by the method to be 390 μs. The method will be useful in characterizing diode lasers and LD modules in high-power applications.     

带鳍通道性能的遗传算法优化

与光滑通道相比,带鳍通道有更高的传热系数,附加的鳍,极大地增强了通道的传热.然而,传热的增强又与压降的升高相关联,这又导致泵动力需求的增加,因此应该寻求对该系统的优化设计.该文的主要目的是,通过如下方式来精确地确定鳍的位置和尺寸:利用遗传算法实现最小压降时达到最优传热.鳍的每种布局作为问题(遗传算法中的一个个体)的一个解.通常,首先随机地产生一个初始种群,然后该算法在所有这些解中搜索,利用布局函数迭代出新解,最后得到鳍的优化设计.     

用于高功率激光装置中的电脉冲整形系统

采用射频GaAs场效应管和微带传输线技术,研制出用于高功率激光装置中的电脉冲整形系统.该系统电脉冲整形宽度为3.5 ns,幅度在0~5 V范围内调节,时域调整精度200 ps.整形后的方波,前沿383 ps,后沿642 ps,顶部不平坦度4~5%,波形幅度稳定性4~5%（p-p).利用该系统产生的整形电脉冲驱动电光波导调制器进行激光脉冲整形,得到了理想的整形激光脉冲.     

液滴在气流中破碎的数值分析

液滴的破碎是液体抛撒、破碎和雾化中的一个非常重要的阶段,它直接影响到最终的液滴的尺寸和散布。为了揭示液滴破碎的机理和影响破碎的因素,本文通过应用VOF方法和湍流模型对液滴在气流中的破碎过程进行了数值计算。数值计算得到了与国外实验研究相一致的液滴破碎形状。并根据数值计算的结果,分析了几个特征参数对液滴破碎过程的影响。     

一个新的IEC61000-4-2标准ESD电流解析表达式

 分析了两个ESD标准电流波形表达式，并提出一个新的基于脉冲函数来描述ESD标准电流的解析表达式，该表达式符合最新的标准IEC61000-4-2，在零时刻的电流及其微分部为0，且波形与实际测量波形基本吻合。     

螺旋管锅炉反应器管内汽液两相流压力降脉动研究

本又根据闭式循环热动力推进系统中锅炉反应器的各种可能的航行方向及运行参数，对螺旋管内汽液两相流压力降脉动特性进行了系统的试验研究，首次区分了两类不同特征的压力降脉动并得到了各主要因素的影响现律和发生脉动的界限准则。     

Displacement wave of the blood vessel —A mechanical model

According to clinical observations and model experiment, we have developed a theoretical model and obtained its mathematical equations to investigate the displacement wave of the blood vessel. The waveform and its occurrence criterion have been obtained by using perturbation theory and numerical method. The present study suggests that the displacement wave is associated with the blood velocity waveform and the machanical behaviour of the blood vessel, but not with the pressure waveform. The clinical criterion is in agreement with the observations.